Autometer Ford Racing Kit Box (5 pc In-Dash Elec Speedo/Oil Pressure/Water Temp/Fuel Level/Volt)

Product 880087 DESCRIPTION:
AutoMeter has brought together the most popular gauges into a simple kit. The kit includes a speedometer, water temperature, oil pressure, fuel level, and voltmeter. All senders included where applicable. Officially licensed Ford product.
Feature Points
Traditional incandescent lighting illuminates around the perimeter of the dial
Kit includes fuel level sender (240E/33F), oil pressure sender, water temperature sender, 2-wire hall-effect speed sender that is compatible with GM/Chrysler applications (7/8" - 18THD), sending unit adapters (1/4", 3/8”, and 1/2" NPT adapters), bulb and socket assemblies, red and green bulb covers, mounting hardware, and detailed instructions for installation.
AutoMeter’s race proven air-core electric instruments provide quick and accurate readings while keeping hazardous fluids outside of the vehicle
12 and 16 volt compatible, compatible with nearly every street car or race car electrical system
Speedometer has a simple push button, 2 mile drive calibration. No dip switches and can be reprogramed at any time to accommodate changes in gear ratio or wheel and tire combination.
Speedometer is compatible with most two wire sine wave and three wire hall effect vehicle speed sensors.
Speedometer features lit LCD odometer - capable of registering one-million miles with two resettable trip odometers
Ships With
Includes Sending Unit: Fuel Sender 3262 - Oil Sender 2242 - Water Sender 2258 - 5293 VSS Sensor
3/8" NPT and 1/2" NPT adapter fittings
Brackets Included
California Residents: Prop 65 WARNING
REVIEWS:
Search topics and reviews
Search topics and reviews
ϙ
Search
★★★★★
No rating value
Be the first to review this product
. This action will open a modal dialog.
Write a review
QUESTIONS:
★★★★★
★★★★★
No rating value for 5 PC. GAUGE KIT, 3-1/8" & 2-1/16", ELECTRIC SPEEDOMETER, FORD MASTERPIECE
Search questions and answers
Search questions and answers
ϙ
Search
0
Reviews
31
Questions
28
Answers
Questions
Ask a question
1–10 of 31 Questions
Sort by:
▼
Menu
John67
· a year ago
is there anything special that I need to install these gauges on a 1967 Mustang? other then the 5292
1
answer
Answer this Question
Steve from AutoMeter · a year ago
There won't be anything else needed besides the 5292 VSS.
Helpful?
Yes · 0
No · 0
Report
Noid
· 2 years ago
Can I change out the incandescent lights that the kit comes with, with the red led bulbs and make them dimmable?
1
answer
Answer this Question
Steve from AutoMeter · 2 years ago
You will need to use P/N: 3284 or 3284-K. As for them dimming they will have no problems being dimmed off the OEM dimmer switch. For further assistance please give us a call at 866-248-6356.
Helpful?
Yes · 0
No · 0
Report
MEKENEK
· 2 years ago
I wish to use the OE fuel sender which has resistance values of 73 ohms empty and 8-12 ohms full, can I use the gauge that comes with the 80087 kit or is there a different gauge for the sender values I have?
1
answer
Answer this Question
Alex at AutoMeter · 2 years ago
This kit includes a 240-33 ohm gauge and matching sending unit. We do not manufacture a 73-10 ohm gauge in the Ford Masterpiece series. If you are set on keeping your OEM sending unit in the vehicle you would need our fuel bridge (p/n 9109) which will allow the 240-33 gauge to work with your 73-10 sending unit.
Helpful?
Yes · 0
No · 0
Report
The Van Man
· 2 years ago
Would this set fit a 61 ford Econoline van
1
answer
Answer this Question
Jim from AutoMeter · 2 years ago
These gauges will work in your Econoline. Be advised you will need to use the included temp, pressure and fuel level senders. The 3262 fuel level sender will have to be adapted into the fuel tank. You will likely need a model 5292 speed sensor:
https://www.autometer.com/hall-effect-speedometer-sender-ford-plug-in.html
Helpful?
Yes · 0
No · 0
Report
Wayne-O
· 3 years ago
I have a 1946 Ford convertible will the speedometer fit my original bezel?
1
answer
Answer this Question
Thomas From AutoMeter · 3 years ago
This speedometer will fit a 3-1/8" hole.
Helpful?
Yes · 0
No · 0
Report
randykg
· 3 years ago
i need a complete set for a1955 ford truck and 1955 ford crown vic.
1
answer
Answer this Question
Thomas From AutoMeter · 3 years ago
These gauges are universal as we do not have specific gauges for specific vehicles. If you would like, send our tech team an email to make sure that your ranges/adapters are correct.
Helpful?
Yes · 0
No · 0
Report
Joeb
· 3 years ago
Hello I have a 1935 ford sedan. Will this gauge kit work with in this vehicle and the 6 volt system?
1
answer
Answer this Question
Sarah from AutoMeter · 3 years ago
Thank you for contacting us. Unfortunately we do not have any gauges that work on a 6 volt system.
Helpful?
Yes · 0
No · 0
Report
Ron81
· 3 years ago
Will ford speedo work with gps
1
answer
Answer this Question
Sarah from AutoMeter · 3 years ago
The Ford Masterpiece electronic speedometer is compatible with our 5289 GPS module.
Helpful?
Yes · 0
No · 0
Report
Ron81
· 3 years ago
Will ford masterpiece speedo work with gps.
1
answer
Answer this Question
Sarah from AutoMeter · 3 years ago
Thank you for contacting us. The Ford Masterpiece electronic speedometer is compatible with our 5289 GPS module.
Helpful?
Yes · 0
No · 0
Report
Gronk
· 3 years ago
I have a 1971 ford,cable drive to speedo,will this work on my car?
1
answer
Answer this Question
Sarah from AutoMeter · 3 years ago
Hello Gronk. If you currently have a cable drive speedometer, you will also need the 5292 Ford Speedometer Sender.
Helpful?
Yes · 1
No · 0
Report
1–10 of 31 Questions
Previous Questions
◄
Next Questions
►
Ask a question
You may also like:
Also Purchased With