Autometer Jeep 52mm 0-100 PSI Short Sweep Electronic Oil Pressure Gauge

Product 880240 DESCRIPTION:
Quite possibly the most critical vital to monitor, engine oil pressure can mean the difference between making it home and needing to replace the engine. The patented air core meter movement provides the durability and accuracy that you expect from the AutoMeter name. Throughout 57 years of building the world’s best competition instruments, this meter movement has been the engine powering the machine that sets the benchmark. A single wire, 1/8” NPT oil pressure sender is included. Officially licensed Jeep product.
Feature Points
Traditional incandescent lighting illuminates around the perimeter of the dial
12 and 16 volt compatible, well-suited with nearly every street car or race car electrical system
Gauge kit includes 1/8” NPT pressure sender, 1/4” NPT adapter, bulb and socket assembly, red and green bulb covers, mounting hardware, and detailed instructions for installation
AutoMeter’s race proven air-core electric instruments provide quick and accurate readings while keeping hazardous fluids outside of the vehicle
Ships With
Includes Sending Unit: 2242
3/8" NPT and 1/2" NPT adapter fittings
2230
California Residents: Prop 65 WARNING
REVIEWS:
Search topics and reviews
Search topics and reviews
ϙ
Search
Write a review
. This action will open a modal dialog.
1–2 of 2 Reviews
?
Sort by: Most Relevant
▼
Menu
≡
Filter Reviews
Clicking on the following button will update the content below
Free state of Florida
Reviews 3
Votes 0
★★★★★
★★★★★
5 out of 5 stars.
Awesome gauge
Installed this in a 1984 CJ7 with a stock 258 cu in I6 engine. Sending unit fit perfectly. Gauge indicated 55psi on first start with cold oil and 25psi at operating temp. Backlight flickered a bit until I bent one of the socket contacts a little…works perfectly now. I also used the Autometer triple gauge bracket for the installation. I’m totally happy with this purchase and would buy it again.
Recommends this product ✔ Yes
Review photo 1.
Photo This action will open a modal dialog.
Review photo 2.
Photo This action will open a modal dialog.
Review photo 3.
Photo This action will open a modal dialog.
Helpful?
Yes · 0
No · 0
Report
Meeker Colorado
Review 1
Votes 0
★★★★★
★★★★★
1 out of 5 stars.
Very Disappointed
I hooked this gauge up and it jumped up with no hesitation to above 100 PSI. I am not sure if the sender or gauge is bad. Hopefully I can get some support.
Recommends this product ✘ No
Helpful?
Yes · 0
No · 0
Report
Write a review
QUESTIONS:
★★★★★
★★★★★
3 out of 5 stars. Read reviews for 2-1/16" OIL PRESSURE, 0-100 PSI, AIR-CORE, JEEP
3.0
2 Reviews
This action will navigate to reviews.
Search questions and answers
Search questions and answers
ϙ
Search
2
Reviews
6
Questions
6
Answers
Questions
Ask a question
1–6 of 6 Questions
Sort by:
▼
Menu
Rob67
· 3 years ago
Will this work with a 1975 Jeep CJ with a 258 engine?
1
answer
Answer this Question
Sarah from AutoMeter · 3 years ago
Thank you for your question. Yes, it is compatible, though it’s important to know that our gauges aren’t vehicle specific.
Helpful?
Yes · 0
No · 0
Report
Cdiluz
· 5 years ago
Wanted to install an electric oil pressure gauge on a 2015 Jeep Wrangler. Can you tell me what it entails?I’ve seen a video to where it involves removing he I take manifold. Can you confirm this for me please? Thank you
1
answer
Answer this Question
Steve from AutoMeter · 5 years ago
You would have to remove the manifold in order to reach the sensor. Another option would be to use a sandwich plate for the oil filter.
Helpful?
Yes · 0
No · 0
Report
Gil350us
· 6 years ago
You don't have that same gauge in mechanical
1
answer
Answer this Question
Zach from AutoMeter · 6 years ago
Thank you for your question. Unfortunately, no, we do not have this gauge available in a mechanical version.
Helpful?
Yes · 0
No · 0
Report
Idaho Jim
· 6 years ago
Is this gauge (Jeep logo) an actual AutoMeter product or some other brand and sold by you? ... Thank you, Jim
1
answer
Answer this Question
Zach from AutoMeter · 6 years ago
Thank you for your question. This gauge is made by us through a licensing agreement with Jeep.
Helpful?
Yes · 0
No · 0
Report
Tracyann
· 6 years ago
What does the back look like
1
answer
Answer this Question
Matt from AutoMeter · 6 years ago
Hi Tracyann, thank you for the question. Our best shot of the back of the gauge would be in the instructions for our universal wiring harness: https://www.autometer.com/media/manual/2650-1797.pdf
Helpful?
Yes · 0
No · 0
Report
jeep1986
· 7 years ago
Is this gauge electric or mechanical, does it require a sending unit, is what is the part number. Thanks
1
answer
Answer this Question
Matt from AutoMeter · 7 years ago
Thank you for the question. The 880240 is an electric gauge and will include the sender. The 2242 Sender is what we include with the gauge. You can see that sender here: https://www.autometer.com/100-psi-electric-oil-pressure-sensor.html
Helpful?
Yes · 1
No · 0
Report
Ask a question
You may also like:
FITTING, ADAPTER, METRIC, M16X1.5 MALE TO 1/8" NPTF FEMALE, BRASS
Product #2268
$15.68
FITTING, ADAPTER, METRIC, 1/8" BSPT MALE TO 1/8" NPTF FEMALE, BRASS
Product #2269
$16.64
FITTING, ADAPTER, METRIC, M10X1 MALE TO 1/8" NPTF FEMALE, BRASS
Product #2265
$17.41
FITTING, ADAPTER, METRIC, M12X1 MALE TO 1/8" NPTF FEMALE, BRASS
Product #2266
$17.25
FITTING, ADAPTER, METRIC, M14X1.5 MALE TO 1/8" NPTF FEMALE, BRASS
Product #2267
$17.09