Autometer Jeep 52mm 100-250 Deg F Short Sweep Electronic Water Temperature Gauge

Product 880241 DESCRIPTION:
A high water temp can be detrimental to an engine. Heat is the enemy of performance and reliability. Keep tabs on your temps with the most trusted water temperature gauge on the market. AutoMeter’s advanced 1/8” NPT temperature transducer is included for a simple installation on any application.
Feature Points
Traditional incandescent lighting illuminates around the perimeter of the dial
12 and 16 volt compatible, well-suited with nearly every street car or race car electrical system
Gauge kit includes 1/8” NPT temperature sender, 3/8” and 1/2" NPT adapters, bulb and socket assembly, red and green bulb covers, mounting hardware, and detailed instructions for installation
AutoMeter’s race proven air-core electric instruments provide quick and accurate readings while keeping hazardous fluids outside of the vehicle
Ships With
Includes Sending Unit: 2258
3/8" NPT and 1/2" NPT adapter fittings
2230
California Residents: Prop 65 WARNING
Videos:
REVIEWS:
Search topics and reviews
Search topics and reviews
ϙ
Search
Write a review
. This action will open a modal dialog.
Florida
Reviews 3
Votes 0
★★★★★
★★★★★
5 out of 5 stars.
Works perfectly
I installed this in a 1984 Jeep CJ-7 with a 258 cid engine. The included sending unit was an exact fit for the port at the rear of the engine. The gauge displayed a solid 195° at operating temperature and I have a 195° thermostat installed. I’m totally satisfied with this gauge.
Recommends this product ✔ Yes
Helpful?
Yes · 0
No · 0
Report
Write a review
QUESTIONS:
★★★★★
★★★★★
5 out of 5 stars. Read reviews for 2-1/16" WATER TEMPERATURE, 100-250 °F, AIR-CORE, JEEP
5.0
1 Review
This action will navigate to reviews.
Search questions and answers
Search questions and answers
ϙ
Search
1
Review
8
Questions
7
Answers
Questions
Ask a question
1–8 of 8 Questions
Sort by:
▼
Menu
wee willi
· 3 years ago
I am interested in a set of black faced gauges for my jeep with jeep logo can i get them with black bezels instead of chrome
1
answer
Answer this Question
Steve from AutoMeter · 2 years ago
Unfortunately our licensed products cannot be altered in any way.
Helpful?
Yes · 0
No · 0
Report
chadeo
· 3 years ago
will this fit 1995 jeep YJ?
1
answer
Answer this Question
Sarah from AutoMeter · 3 years ago
It will fit in a 2 1/16” hole, and you have to use the sender that comes with the gauge.
Helpful?
Yes · 0
No · 0
Report
J123
· 3 years ago
Do you sell a clock that matches these instruments?
1
answer
Answer this Question
Sarah from AutoMeter · 3 years ago
Thank you for contacting us. Yes, please take a look at Part #2585.
Helpful?
Yes · 0
No · 0
Report
Adz4x4
· 4 years ago
Hello, does these come or be made to celcius and kph? Thanks
1
answer
Answer this Question
Natalia from AutoMeter · 4 years ago
Hello! Unfortunately, 880241 is not available in celsius. We do offer similar water temperature gauges in celsius including 3337-M.
Helpful?
Yes · 0
No · 0
Report
sunny
· 5 years ago
how accurate or what is the accuracy + or - how many degrees.
1
answer
Answer this Question
Steve from AutoMeter · 5 years ago
Hello,
Thank you for your question. A properly installed SSE gauge will return accuracy levels no worse than +/- 5% at full deflection.
Helpful?
Yes · 0
No · 0
Report
Tinker
· 5 years ago
does this include the sensor?
1
answer
Answer this Question
Zach from AutoMeter · 5 years ago
Thank you for your question. Yes, this gauge does include our sensor #2258.
Helpful?
Yes · 0
No · 0
Report
Bph5
· 7 years ago
Will this fit in factory spot
1
answer
Answer this Question
Matt from AutoMeter · 7 years ago
Thank you for the question. The 880241 Water Temperature gauge is not necessarily designed as a factory fit or factory replacement gauge, but will fit into a 2-1/16" diameter hole. The outer diameter of the bezel is 2-5/16".
Helpful?
Yes · 1
No · 0
Report
Bumstead
· 4 years ago
I did not receive a sending unit with my gauge it has Jeep on the front of the face and it was for my 360 v8 . The motor is a 1979 360 can I order a water temperature sending unit
0
answers
Answer this Question
Ask a question
You may also like:
FITTING, ADAPTER, METRIC, M12X1.5 MALE TO 1/8" NPTF FEMALE, BRASS
Product #2277
$16.69
FITTING, ADAPTER, METRIC, M12X1.75 MALE TO 1/8" NPTF FEMALE, BRASS
Product #2278
$17.30
FITTING, ADAPTER, HEATER HOSE, 5/8", 1/8" NPTF FEMALE, BRASS
Product #2280
$46.99
FITTING, ADAPTER, HEATER HOSE, 3/4", 1/8" NPTF FEMALE, BRASS
Product #2281
$51.87
FITTING, ADAPTER, RADIATOR HOSE, 1" TO 1.25", 3/8" NPTF FEMALE, ALUMINUM
Product #2282
$60.03
FITTING, ADAPTER, RADIATOR HOSE, 1.5", 3/8" NPTF FEMALE, ALUMINUM
Product #2283
$62.14