Product 9105 DESCRIPTION:
The single largest contributing factor to fuel economy on your vehicle is the “loose nut behind the wheel”. Driver input affects the amount of fuel you use more than anything else. The Ecometer by AutoMeter is a simple, plug and play device that connects to your vehicle’s OBDII port and allows for instantaneous monitoring of the exact fuel economy of your vehicle. So much more than a simple vacuum gauge, the Ecometer monitors a huge range of engine parameters to precisely determine how much you’re spending at the pump. A digital tach and speedometer are also included in it’s functions, as well as instant and cumulative fuel economy. Designed to work with nearly any 1996 and newer OBDII gasoline engine vehicle, the Ecometer can help you to easily realize fuel savings of up to 30% with only minor changes in driving habit.
Feature Points
Compatible with most gasoline ODBII equipped vehicles from 1996 to present
Includes 5ft. Wiring Harness with 1 wire installation which easily plugs into OBDII port
Displays RPM, Speed, Instant MPG, and Average MPG.
Installs in minutes!
Ecometer's ecograph helps you improve your driving habits to increase your fuel efficiency and reduce your fuel costs.
Ships With
Hardware Included
California Residents: Prop 65 WARNING
REVIEWS:
Search topics and reviews
Search topics and reviews
ϙ
Search
Write a review
. This action will open a modal dialog.
Hoonah, Alaska
Review 1
Votes 0
★★★★★
★★★★★
4 out of 5 stars.
Great for those monitoring fuel consumption, but…
Lots of information to be gleaned from this handy little gauge, and no regrets for paying a rather steep price, but the Ecometer needs some help on the display. A bright overcast sky or direct sunlight reflected of the front of the display will make the gauge unreadable. Put some thought into where you intend to locate this unit in your automobile!
Recommends this product ✔ Yes
Helpful?
Yes · 0
No · 0
Report
Write a review
QUESTIONS:
★★★★★
★★★★★
4 out of 5 stars. Read reviews for 2-1/16" ECOMETER, 1.0-99.9 MPG, 1996+, ECOMETER
4.0
1 Review
This action will navigate to reviews.
Search questions and answers
Search questions and answers
ϙ
Search
1
Review
31
Questions
30
Answers
Questions
Ask a question
1–10 of 31 Questions
Sort by:
▼
Menu
CampbellSys
· 3 years ago
Installed on a 2016 Mercedes Metris, works, but stays illuminated after exiting and locking up.. Does not seem acceptable, as it remains warm to the touch, indicating significant battery depletion is likely to leave me stranded with a dead battery :-(
2
answers
Answer this Question
Rolyak · 4 months ago
Assume product is LED powered so not likely to drain your battery.
25 Ma so if your battery in old, disconnect after one week from OBD plug.
Helpful?
Yes · 0
No · 0
Report
PhilW
· 2 years ago
Hi, will this work at all on a diesel vehicle?
1
answer
Answer this Question
Jim from AutoMeter · 2 years ago
This will not work in a diesel application.
Compatible with most gasoline ODBII equipped vehicles from 1996 to present.
Helpful?
Yes · 1
No · 0
Report
ShelbyGS
· 2 years ago
Can you reset the average fuel economy easily
1
answer
Answer this Question
Jim from AutoMeter · 2 years ago
https://www.autometer.com/pub/media/manual/2650-1592.pdf
See Part 2 of the instruction above. It's an easy reset process.
Helpful?
Yes · 0
No · 0
Report
Dj Salad
· 2 years ago
Will this work for 2003 toyota corolla?
1
answer
Answer this Question
Jim from AutoMeter · 2 years ago
This device will work on your 2003 Corolla.
Helpful?
Yes · 0
No · 0
Report
thelostdutchman
· 3 years ago
Will this fit inside an A pillar mount like Product #12225?
1
answer
Answer this Question
Jim from AutoMeter · 3 years ago
The Eco Meter will not fit into a pillar mount. It must use the included mount.
Helpful?
Yes · 0
No · 0
Report
SteveC
· 3 years ago
Hello; I'd like to pre-verify compatibility to a 2017 Mercedes Metris which has a gas 2.0L 4cyl turbocharged engine. Thank you :-)
1
answer
Answer this Question
Jim from AutoMeter · 3 years ago
This Eco Meter should work fine connected to the OBDII port in your Mercedes.
Helpful?
Yes · 0
No · 0
Report
RalphS
· 4 years ago
Do you have a wiring diagram that I can use to capture the RPM on a separate gauge that measures RPM of the vehicle? Or can you state which wire I can use from the ODB harness.
1
answer
Answer this Question
Natalia from AutoMeter · 4 years ago
Thank you for your question. Unfortunately, we do not.
Helpful?
Yes · 0
No · 0
Report
Eddie1946
· 4 years ago
how accurate is this gauge? will it last long term
1
answer
Answer this Question
Natalia from AutoMeter · 4 years ago
Thank you for your question. This will be as accurate as possible. It pulls the information off of the vehicle's OBD-II port. Doing this you will need to make sure the unit is plugged in at all times in order to keep an accurate reading. For further assistance on this, please give our tech line a call at 866-248-6356.
Helpful?
Yes · 0
No · 0
Report
Gozza
· 4 years ago
Will the ecometer work on 1060cc engine?
1
answer
Answer this Question
Natalia from AutoMeter · 4 years ago
Thank you for your question. The Ecometer will work with most OBD-II equipped gasoline automobiles from 1996 to present.
Helpful?
Yes · 0
No · 0
Report
curry25612
· 4 years ago
Will this work if I have changed to a larger diameter tire size?
1
answer
Answer this Question
Natalia from AutoMeter · 4 years ago
Thank you for your question. Yes, it will. If your ecometer displays a different average MPG value than your calculated value, you can fine tune the ecometer to match the condition of your vehicle engine by following the steps on page four of the instructions: https://www.autometer.com/pub/media/manual/2650-1592.pdf
Helpful?
Yes · 0
No · 0
Report
1–10 of 31 Questions
Previous Questions
◄
Next Questions
►
Ask a question
You may also like:
TIRE PRESSURE, 0-60 PSI, AUTO GAGE
Product #2343
$31.86
TIRE PRESSURE, 0-60 PSI
Product #2160
$39.05
TIRE PRESSURE, 0-100 PSI
Product #2164
$39.08
Product title
Vendor
$19.99 CAD | $24.99 CAD
Product title
Vendor
$19.99 CAD | $24.99 CAD
Product title
Vendor
$19.99 CAD | $24.99 CAD
Product title
Vendor