11410395192KT
Description
Details
- SKU:
- KIT-11410395192KT
- Quality:
- Genuine
-
OE Numbers
- 11410395192, 11410392544, 11410390281, 11410306098, 11410301359
-
MFG Numbers
- OX68D
This Kit Includes
| Qty | Part | SKU | Brand |
|---|---|---|---|
| 6 | Engine Connecting Rod Bearing | BMW-11247835439 |  |
| 6 | Engine Connecting Rod Bearing | BMW-11247835440 | |
| 1 | Self Locking Hex Nut | BMW-07119905374 | |
| 1 | Engine Oil Pan Cover Gasket | BMW-11137832023 | |
| 1 | Engine Oil Dipstick O-Ring | BMW-11431707164 | |
| 12 | Suspension Subframe Reinforcement Bracket Bolt | BMW-31106772199 | |
| 1 | Steering Shaft Bolt | BMW-32306778609 | |
| 1 | Engine Oil Filter | MAH-OX68D |  |
Product Information
Kit assembled in house by FCP to replace service kit 11410395192 put together by BMW to address S54 rod bearing failures, this affects S54 engines in E46 M3's built between 2/12/2001 and 5/22/2003
The S54 engine is known for many things. One of it's downfalls was early production E46 M3 rod bearing failures due to mis-manufactured bearings by BMW's supplier. BMW put together service kit 11410395192 which included all parts required to replace worn or defective rod bearings. This kit is no longer available from BMW despite the individual pieces being available.
Models affected:
E46 M3 Convertible:
Chassis Range - EX20040-EX24999
Chassis Range - PK00000-PK03913
E46 M3 Coupe:
Chassis Range - JR10051-JR23641
Please note: This kit is intended for early production S54 engines only. The connecting rod bolts are M11x1.25mm bi-hexagonal (12 point) bolts and are intended to be reused. It is absolutely required to install the bolts into the same connecting rod location they were removed from. Example, an exhaust side bolt must go back to the exhaust side hole on the connecting rod. Before removal mark the bolt location. The M11x1.25mm connecting rod bolts follow a specific tightening sequence which must followed:
1) Jointing torque - 5 Nm (~4 ft lbs)
2) Setting torque - 30 Nm (~15 ft lbs)
3) Angle of rotation - 70°
About Genuine BMW
The original parts used by BMW to build your car are available as replacement parts under the “Genuine BMW” brand. When ordering a Genuine BMW part you are guaranteed to get the same part that you would pick up from your local dealerships part department. Genuine BMW parts have been built to BMW’s stringent standards and are the same quality of the original parts used to build your Ultimate Driving Machine.
You may not realize this, but the parts that make up your BMW are not necessarily manufactured by BMW. No cause for concern, as BMW designs the part, hires a manufacturer, and ensures its quality to you. In fact, many of these manufacturers have been making parts for BMW for decades. In our industry these manufacturers are called OEM (Original Equipment Manufacturers), and these are often brands you recognize, including Lemforder, ZF, Sachs, Bosch, Valeo, Zimmermann, Siemens VDO, Corteco, and more. Don’t be surprised to open that Genuine BMW parts box and find an OEM branded part inside, simply with the addition of a BMW logo.
Be sure to keep an eye out for OE tags on our product pages to quickly identify parts coming direct from OE manufacturers. That extra bit of insight could save you some serious money while shopping! Refer to our OE Academy for further information regarding the OE/OEM tags throughout the site.
Fits These Cars
BMW M3
-
2001 BMW M3 Engine Connecting Rod Bearing Kit
-
2002 BMW M3 Engine Connecting Rod Bearing Kit
-
2003 BMW M3 Engine Connecting Rod Bearing KitUp to 2/2003
Product title
Vendor
$19.99 CAD | $24.99 CAD
Product title
Vendor
$19.99 CAD | $24.99 CAD
Product title
Vendor
$19.99 CAD | $24.99 CAD
Product title
Vendor