Carli 08-16 Ford F250/350 SD Stainless Steel High Mount Steering Stabilizer 2.5in & 4.5in Lift

CS-FHMSS-08

– Inside the Carli Stainless Stabilizer
– Bolt in Replacement for OEM Stabilizer
– Fitment: 2008-2016 F250/350 4×4
– Works on leveled and lifted trucks ONLY
– WILL NOT work with Dropped Pitman Arms

Description
2005-07 Super Duty:
No High mount is available thanks to the factory stem-top shock mounting style. We recommend the Fox 985-24-035. It’s a good-quality stabilizer but the frame bracket requires substantial clearance to fit the stem-top Fox shock.

Low Mount Steering Stabilizer: Carli Differential Guard and tie-rod clamp provide mounting provision for this stabilizer. A higher nitrogen charge pushes to the Right to counter-act a Left Hand Tire Pull.
2008-16 Super Duty:
Adds ability to run the High-Mount.

Low Mount Steering Stabilizer: Carli Differential Guard and tie-rod clamp provide mounting provision for this stabilizer. A higher nitrogen charge pushes to the Right to counter-act a Left Hand Tire Pull.
High Mount Steering Stabilizer: Installs up and out of the way with the provided frame hardware and Drag-Link Bracket. A higher nitrogen charge pushes to the left to counter-act a Right Hand Tire Pull. Combine with a Carli Low-Mount for a true, infinitely adjustable stabilization system for optimal damping with any tire.
2017-21 Super Duty:
Same as 2008-16 but the high mount runs a short rod-end at the drag link bracket.

Low Mount Steering Stabilizer: Carli Differential Guard and tie-rod clamp provide mounting provision for this stabilizer. A higher nitrogen charge pushes to the Right to counter-act a Left Hand Tire Pull.
High Mount Steering Stabilizer: Installs up and out of the way with the provided frame hardware and Drag-Link Bracket. A higher nitrogen charge pushes to the left to counter-act a Right Hand Tire Pull. Combine with a Carli Low-Mount for a true, infinitely adjustable stabilization system for optimal damping with any tire.
What is a Steering Stabilizer?
Contrary to popular belief, It’s not a magic cure for a wandering truck and it won’t fix your death-wobble. Well, it may mask Death Wobble and certainly helps ward it off by damping front-end forces leading to it but, I digress – read our other blog article if you’re after a fix for death wobble… A steering Stabilizer is simply a damper designed for your steering. A Steering Damper’s purpose is to increase steering predictability while minimizing volatility, road noise and driver fatigue. Simply put, a good steering stabilizer will stabilize the steering; shocker, right?

Stock Steering Stabilizers are designed for stock steering and stock tires. They work well in this application (for about 50,000 miles) and ONLY this application. Throw on a Carli kit and some 35” or 37” tires and you’ll be left wanting. When the tire size increases, the stabilizer should be upgraded as well. Larger, aftermarket tires are significantly heavier and harder to control than factory tires, even in on-road applications.