Coilover Suspension Street - BMW / E9 / 2.5 CS / 2800 CS / 3.0 CS / 3.0 Csi / 3.0 CSiL | MTSGWBM52

MTSGWBM52

Street: The Street series is the most popular and default configuration suggested by MTS Technik engineers, offering a wide range of vehicle lowering adjustments and unique driving properties. It combines comfort and stiffness, allowing for dynamic driving while maintaining the usability of the vehicle. Perfect for drivers who expect precise control and excellent driving characteristics both in everyday use and during dynamic driving. The Street Series offers versatility in settings and a responsive suspension feel.

MTS Technik Coilover Suspension - the perfect choice for drivers who appreciate the flexibility and the ability to adjust the suspension altitudes depending on your preference and road conditions. Stiffening of the suspension makes the car better to drive, more predictable and more secure.

Optimum alignment of the MTS Technik coilover suspension components causes recognition of the growing number of users. Large rims in the summer, smaller in the winter - thanks to MTS Technik coilover kits You can adjust the ride height to Your needs.



Features:

• 2 year warranty with no mileage limit to confirm high quality.
• Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
• The use of twin-tube technology guarantees stable shock absorber performance.
• Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
• Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
• The camber plates allow the wheel angle adjustment and increase the precision of driving.
• Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.
• Additional height adjustment at the bottom mounting, allowing the car's height reduction to be changed, without interfering with the spring operation characteristics.
• Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance.
• Coilover springs made by Eibach, the world leader in the sport springs industry.

Specifications:

• Series : Street
• Housing : gold
• Max. Axle Load FA : -900 kg
• Max. Axle Load RA : -900 kg
• Lowering FA : 25 - 100 mm
• Lowering RA : 35 - 85 mm
• Camber / top mount FA : yes
• Camber / top mount RA : no
• TUV Certificate : no

Fitments:

• BMW E9 Coupe 2.5 CS | 2800 CS | 3.0 CS | 3.0 Csi | 3.0 CSiL 1969-1976

Notes :

• Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).
• If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
• During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
• Independent height adjustment at the lower brackets on the front dampers.
• Set includes 2x upper camber plates on the front axle.
• The installation requires the use of OE front struts - they should be cut and welded as described in the attached manual.
• Including M-Technik.
• Rear thread adjustment block is mounted on the top.
• Front shock absorber housing diameter 52mm.

Notes :

• Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).
• If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
• During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
• Independent height adjustment at the lower brackets on the front dampers.
• Set includes 2x upper camber plates on the front axle.
• The installation requires the use of OE front struts - they should be cut and welded as described in the attached manual.
• Including M-Technik.
• Rear thread adjustment block is mounted on the top.
• Front shock absorber housing diameter 52mm.