CTS Turbo F55/F56 Mini Cooper/Cooper S/JCW Lowering Springs

CTS-LS-005

Description

Lowering the ride height of the F55/F56 Mini has a profound impact on its handling characteristics, elevating its overall performance. It enhances the car’s agility, making it feel more lightweight and responsive, particularly when it comes to sharp turns. This modification is a significant improvement over the factory setup.

The Mini F56 Lowering Springs, thanks to thoughtfully chosen progressive spring rates, don’t compromise ride quality, especially at slower speeds. In fact, they can even enhance the driving experience at lower speeds. However, when you push the car through corners, the Mini’s chassis truly comes alive. It becomes more responsive, direct, and exhibits significantly sharper turn-in capabilities.

Furthermore, these springs offer an aesthetic transformation for the car. They lower the front by approximately 30mm and the rear by 25mm, eliminating those unsightly wheel arch gaps. The result is a Mini that looks the way it should have right from the factory.

It’s essential to avoid going too low or opting for stiffer springs than these, as it can lead to an uncomfortable ride with bouncing and crashing, caused by a mismatch between the dampers and spring rates, and limited spring travel.

DCC compatible: Our springs are compatible with DCC. Our springs couple very well with dynamic damper control, maintaining the ride characteristics between the different modes.

Lowering Specs:

Front: 1.1″ lowering on average
Rear: 1″ lowering on average

Featured:

• Improved handling
• Excellent ride quality
• A more aggressive look
• Precision-tuned spring rates
• Reduced fender gap

*CTS suspension components should only be installed by a qualified licensed mechanic experienced in the installation of suspension components.
*Final ride height is achieved after a few days of driving.

Model

Generation