Darkside Front Mount Intercooler Kit (FMIC) for 1.9 TDi PD130 ASZ

The Kit replaces the stock plastic pipe work and unnecessary joints that can cause boost leaks. The end tanks of the Intercooler are also Alloy so will also hold a higher level of boost, the thicker core offers vastly improved cooling capacity

The Welded Alloy Pipes are 51mm and fit perfectly in place of the stock turbo pipes

This kit consists of:

Darkside Developments Alloy Front Mount Intercooler 
Darkside Developments Alloy Pipe Kit with MAP Sensor Boss
Darkside Developments Silicone Hoses
Darkside Developments Turbo Clip Adapter (Optional)
Stainless Steel Clamps

VW Golf Mk4 - ASZ 130
VW Bora / Jetta - ASZ 130

This will also fit US SPEC - BEW 100 engines with the addition of a Euro Crash Bar
THIS WILL NOT FIT THE BEETLE

Intercooler Dimensions

Core Size - 500mm x 235mm x 60mm
Overall Height - 235mm
Overall Length - 640mm

The reason for the price increase when removing the EGR Valve is because we include our own custom pipe from the Alloy Pipework to the EGR Delete, where as when retaining the EGR Valve you keep the Stock Pipe

We have a full fitting guide available for this Kit

We also have a Side Mount Intercooler Kit, that is listed here: 

https://www.darksidedevelopments.co.uk/products/upgraded-side-mount-intercooler-kit-for-1-9-tdi-pd130-asz-and-us-spec-bewengine.html

This kit will not fit the PD130 ASZ Seat Ibiza / VW Polo and Skoda Fabia, the kit for these vehicles can be found here:

https://www.darksidedevelopments.co.uk/products/hard-pipework-kit-for-seat-ibiza-vw-polo-skoda-fabia-with-seatsport-fmic.html

https://www.darksidedevelopments.co.uk/products/seatsport-ibiza-cupra-intercooler-for-seat-ibiza-vw-polo-skoda-fabia.html

(Sometimes the turbo clip can be quite tight to push in due the tolerances we have them machined to. We have found that warming the turbo compressor housing with a heat gun helps the clip push in)