Darkside 1.9 TDI US Spec BEW EGR Delete / Inlet Manifold

The BEW is a tricky one to remove the EGR as the Manifold has an integrated Swirl Flap. Because of this we offer a range of EGR Delete options for this model@


Option 1 consists of the following:
Genuine Used Cleaned PD150 Inlet Manifold + Bolts and Gasket
Darkside Developments 51mm EGR Delete Race Pipe Kit
(This option removes the ASV)


Option 2 consists of the following:
Genuine Used Cleaned PD150 Inlet Manifold + Bolts and Gasket
Darkside Developments Double Flange EGR Delete Race Pipe Kit
(This option retains the ASV)

Option 3:
EGR Blanking Kit - https://www.darksidedevelopments.co.uk/products/egr-blanking-kit-for-1-9-tdi-8v-bew-brr-brs-bke-brb-bpw.html
This option retains the EGR Valve, Cooler + ASV but blanks off the exhaust gases

Option 4:
We also offer a custom inlet manifold available here - https://www.darksidedevelopments.co.uk/products/darkside-custom-aluminum-1-9-tdi-8v-inlet-manifold.html
(This option removes the ASV)

We also offer an EGR Cooler Delete pipe that is worth doing at the same time - https://www.darksidedevelopments.co.uk/products/1-9-8v-tdi-pd150-arl-and-us-alh-bew-pd100-egr-cooler-delete-pipe.html


Please Note: Once the valve is either removed or blanked off the vehicles ECU will no longer get a signal from the EGR Valve causing the emissions workshop light to appear on the dash board. We can remove this by reprogramming the EGR software on the ECU.

DARKSIDE DEVELOPMENTS ACCEPTS NO RESPONSIBILITY FOR THE USE OF THIS PART ON THE PUBLIC HIGHWAY WHERE REMOVAL OF EMISSIONS CONTROLS IS PROHIBITED. IT IS THE CUSTOMERS RESPONSIBILITY TO ENSURE THEY COMPLY WITH RULES AND LAWS RELATING TO THEIR HOME COUNTRY