ICON 07-18 Jeep Wrangler JK Adj Thru Shaft Steering Stabilizer Kit

22020 Overview
Engineered to provide consistent steering damping with a through-shaft design, the new ICON Centerline Steering Stabilizer features an adjustable “Drive Zone” that can be custom-tailored to an individual’s desired steering feel. Developed with a wide range of aftermarket JK components in mind, this stabilizer is a high clearance design with a rotatable reservoir that allows for fitment on all ICON lift systems as well as most other lifts on the market. In addition to providing steering damping without the push or pull associated with a traditional stabilizer, the ICON Centerline Stabilizer features an adjustable “Drive Zone” with 9 levels of damping that affects 110 degrees of steering wheel input to the left or right of center. This allows the end user to customize how tight or how loose their vehicle handles in the middle of the steering range.
The 4-link brackets, upper links, and lower links are sold separately, allowing the 4-link system to be customized for your specific Ford Super Duty year range.
Standard
+0.75" Lift over stock
Rate Option #1
Read more
Key Features
Through shaft design eliminates push/pull sensation associated with traditional stabilizers
Increased steering damping over stock unit
Provides symmetrical steering feel throughout input range
Adjustable “Drive Zone” with 9 clicks of damping adjustment
100% bolt-on installation
High clearance design and rotatable reservoir for proper fitment on all lift heights
Mounts to OE 1-3/8” tie rod
Optional clamps for aftermarket heavy duty tie rods (1-5/8”)
Fully serviceable ICON 2.0 Aluminum Series shock
6063 clear anodized aluminum shock body provides excellent corrosion resistance and superb heat dissipation
5/8” chrome plated hardened steel shaft
5WT shock oil for consistent suspension damping along a wide temperature range
FK Rod End bearings for precise function
Warranty
Installation Guide
CA Residents: Prop 65 Warning
WARNING
This product contains chemicals known to the State of California to cause cancer, birth anomalies, or other reproductive harm.
Specifications
Brand ICON Vehicle Dynamics
UPC 840103401270
Proxy Number 22020
Shipping Width 7.00 in
Shipping Length 25.00 in
Shipping Depth 4.00 in
Shipping Weight 8.0000 LB
Technical Notes
TECH NOTE: This kit is intended for use with a 3-6" lift and will not work on a stock vehicle. A minimum of 1" bump stop spacer is required for adequate clearance.
TECH NOTE: 4.5" kits and taller allow the reservoir of the stabilizer to be rotated straight up above the shock body. 3" kits require the reservoir to be rotated down behind the shock body.
TECH NOTE: If using a heavy duty 1-5/8” aftermarket tie rod, oversized clamp kit (PN: 614525) must be used