ICON 21-25 Ford F-150 Raptor Driver Side Rear 3.0 Zeta RXT Remote Reservoir Shock

$2,811.53 CAD

Shipping calculated at checkout

ICON SKU: ico95206R

<p>Earn%20[points_amount]%20when%20completing%20this%20purchase.</p>

95206R Overview
ICON Vehicle Dynamics is known for its extensive research and development put into every product, the revolutionary outcome of this research is what sets ICON apart from the off-road industry standard. The Ford F-150 Raptor is a unique production truck, designed & built, to bridge the gap between a standard street “pickup truck” and an off-road pre-runner. Since the F-150 Raptor’s release ICON Vehicle Dynamics’ engineers have pushed this vehicle to extremes in order to develop the most comprehensive suspension components on the market. From the brutal deserts of Baja, to the deep snow of Michigan’s U.P., to the wooded trails of the East coast, ICON suspension systems have been put to the test and consistently perform beyond expectation. Unable to leave “well-enough” alone, ICON is once again aiming to raise the bar in Raptor performance with the introduction of the RXT Rear 3.0 Remote Reservoir Bypass Shock for the 2021-2025 Gen3 F-150 Raptor.
The 4-link brackets, upper links, and lower links are sold separately, allowing the 4-link system to be customized for your specific Ford Super Duty year range.
Standard
+0.75" Lift over stock
Rate Option #1
Read more
Key Features
3.0 RXT 3-tube bypass rear shock with 3.0 remote reservoir
Unique side-mounted upper eyelet allows for increased travel while utilizing factory mounting location
Application specific shock length designed to be paired with ICON rear coil springs provides up to 17" of rear wheel travel
Recirculating Dual Hose Reservoir (Patent Pending) keeps shock temperatures low by pumping heat to the reservoir for increased dissipation
12" finned aluminum reservoirs provide generous oil volume and increased surface area for enhanced cooling properties and consistent damping
Anti-Wobble Link (Patent Pending) keeps bypass tubes clear of wheel and tire
ICON's CDE Valve technology allows for in vehicle adjustment of compression damping settings and active adjustment via the ICON Intelligent Control (IIC) independently from bypass valve settings
Bypass valves feature easy-to-adjust detented adjustment knobs in quarter turn increments for quick adjustability without the use of tools
High resolution bypass valves designed for noticeable fine tune adjustments in rebound and compression
High flow CNC machined welded bypass blocks designed to increase fluid flow for enhanced performance & high definition tuning
Replaceable bypass tubes that can easily be replaced if damaged
Direct bolt in to OEM location with bypass adjustment knobs easily accessible for tuning adjustment
Special engineered damped valve seats for quiet and precise operation without the standard bypass loud “clicking” noise you will find with other brands
Cerakoted cylinder finish with hard anodized aluminum bypass tubes
Protective shin guard protects shaft from debris strikes to maintain smooth sealing surface and increase service intervals
Warranty
CA Residents: Prop 65 Warning
WARNING
This product contains chemicals known to the State of California to cause cancer, birth anomalies, or other reproductive harm.
Specifications
Brand ICON Vehicle Dynamics
UPC 840103435510
Proxy Number 95206
Shipping Width 13.00 in
Shipping Length 38.00 in
Shipping Depth 8.00 in
Shipping Weight 45.0000 LB
Technical Notes
APPLICATION NOTE #150: Shocks are fully serviceable
APPLICATION NOTE #198: An iOS operated device is required to run ICON Intelligent Control app
APPLICATION NOTE #204: Also requires installation of applicable IIC kit and CDEV front shocks
APPLICATION NOTE #223: Vehicles equipped with single solenoid OE shock absorbers also require ICON solenoid mount kit part number 95020
APPLICATION NOTE #226: Not compatible with OE rear coils. Shock length requires ICON rear coil springs part number 95230 or 95231.
APPLICATION NOTE #228: Shocks are sold individually. Driver side shock part # 95206L is also required.
APPLICATION NOTE #231: Vehicles equipped with dual solenoid OE shock absorbers also require damper interface device not currently offered by ICON but available from other third party manufacturers

This website does not show live stock.

If the product is in stock we ship same/next day.

If a product needs to be ordered in the typical wait time is 1-2 weeks (Can Be Longer). This means the product is special ordered.

In General Special orders cannot be canceled, although some brands and suppliers allow it with a restocking fee and or return shipping.  

Shipping times vary depending if the part is in stock at our warehouse and which shipping option is chosen at checkout.

Please contact us for an accurate ETA and availability.