IE AUDI B8 & B8.5 2.0T PERFORMANCE DOWNPIPE

Equipping your B8 A4 or A5 2.0T engine with an IE catted downpipe delivers additional horsepower, torque, and responsiveness when paired with a matching Stage 2 ECU tune. These significant power gains are added through the entire RPM band by allowing the turbocharger to flow freely through the 3" downpipe, high-flow catalytic converter, and mid-pipe. Careful tuning of the added sound from freeing up exhaust flow rewards you with an aggressive exhaust growl every time you accelerate while minimizing cabin drone. All IE exhaust systems are designed in-house using state of the art digital scanning for a perfect fit and manufactured from 1/16” thick wall 304 stainless steel offering a lifetime of performance and fun.

OVERVIEW VIDEO 

B8 & B8.5 2.0T DOWNPIPE POWER GAINS

• B8 & B8.5: Gains of approximately 25-30 HP & FT-LB over stage 1 on stage 2 IE ECU Tune/Software*

 *Power figures recorder from full bolt-on and tuned Stage 2 cars. Power measured at the hub performed on a hub dynamometer, power figures are taken from multiple vehicles. Power gains may differ from advertised as individual vehicles will vary in maintenance, mileage, and conditions. HP=horsepower, TQ= Torque ft-lbs.

HI-FLOW CATALYTIC CONVERTER

IE's performance downpipe includes a high-flow 200 cell per inch metal matrix catalyst on the mid pipe section. This included cat greatly reduces emissions output and unwanted smells that are common on all catless systems, without losing horsepower! Have all the benefits of catless performance and none of the drawbacks with the IE high-flow cat system.

DIRECT BOLT-ON DOWNPIPE WITH PERFECT FIT

The IE downpipe replaces the majority of the factory exhaust from the turbocharger all the way back to the factory exhaust just before the rear axles. The car was digitally scanned and this downpipe digitally designed for an exact fit and includes all hardware to make the install easy and straightforward.The downpipe section includes a new mount bracket and utilizes the factory mount points along with a tough interlock core flex section, this allows engine and chassis movement without stressing or cracking your downpipe. Easily connect the downpipe and catted mid-pipe using the simple and strong v-band connection. Finally, the mid pipe mounts to the stock rear exhaust with the included 3" to 60mm slip-fit sleeve, or easily adapt it to your cat-back exhaust of choice.

INSTALL OVERVIEW VIDEO 

PRODUCT INSTALLATION

IE recommends the install should be done by a certified technician and will be far easier if completed on an auto lift. CLICK HERE to view and download the install guide.

This product is not CARB approved or for sale within California.

VEHICLE FITMENT

• AUDI - A4 2009-2015 (B8 - B8.5) 2.0T engine
• AUDI - A4 Allroad 2009-2015 (B8 - B8.5) 2.0T engine
• AUDI - A5 2008-2015 (B8 - B8.5) 2.0T engine
• AUDI - Q5 2009-2017 (8R) 2.0T Gen 2 engine