109057

MotylGear 75w-90 Techosynthese - Semi Synthetic- API GL-4/GL-5, MIL-L-2105DMeets gear oil viscosity requirements for 75W. Recommended for "notchy" manual transmissions. Meets Castrol BOT 750B, Castrol BOT 720 

Motul Motylgear (GL-4/5) 75W-90 Gear Oil - 5 Liter

Type: Gear Oil 75W-90 - Technosynthese (Semi-Synthetic)
Specifications: . Meets API GL-4/GL-5
OEM Approval: MIL-L-2105D

Technosynthese - Gearbox and differential lubricant

MOTUL Technosynthese lubricant is a lubricant composed of a mixture of synthetic base oil and mineral oil base. MOTUL routinely uses a synthetic ester base oil in its lubricants.

Technosynthese lubricant for a better resistance at high temperature and longer life time. All mechanical transmissions, synchronized or not synchronized gearboxes, gearbox/differential, transfer gearbox an hypoid differentials without limited slip system operating under shocks, heavy loads and low revolution speed or moderate loads and high revolution speed.

Very high lubricating power decreases friction and wear. SAE 90 grade at hot temperature to provide outstanding oil film resistance at hot temperature and/or to reduce transmission noise. Fluid at low temperature to allow easier gear shifting when the gearbox is cold. Less effort required on the gear lever to shift the gears.

TYPE OF USE
Specially recommended for gearboxes hard to shift and/or noisy gearboxes.

All mechanical transmission, synchronized or not synchronized gearboxes, gearbox/differential, transfer gearbox and hypoid differentials without limited slip system operating under shocks, heavy loads and low revolution speed or moderate loads and high revolution speed.

PERFORMANCES

• Extreme pressure lubricant for an efficient anti wear protection reinforced with synthetic base stocks for a better resistance at high temperature and longer life time.
• Stays in 90 grade after KRL 20 hours shear test as requested by SAE J306 Standard, July 1998 update
• Very high lubricating power which decreases friction and wear.
• 90 grade at hot temperature to provide outstanding oil film resistance at hot temperature and/or to reduce transmission noise.
• Fluid at low temperature to allow easier gear shifting when the gearbox is cold.
• Less effort required on the gear lever to shift the gears.
• Suitable for any type of seal and yellow material used in gearboxes design.
• Anti-corrosion, Anti-foam.

Warranty Information
Motul products are all API and SAE approved with the latest certifications. Using the correct application of Motul product will not void the vehicle's factory warranty.

MOTUL
Motul has risen above existing standards by developing products based on unconventional technologies like the Double Esters of the 300V range for cars and motorcycles or else the amine-free and boric acid-free technologies used in the aeronautics industry for machining titaniums.

Fits These Cars