RockJock JL/JT Adjustable Sway Bar End Link Kit Front 8 1/2in Long Rods

This RockJock Adjustable Sway Bar End Link Set for the front of JL Wranglers and JT Gladiators features 8 1/2 in. long link rods with 2 5/8 in. of 1/2 in.-20 LH thread and 2 5/8 in. of 1/2 in.-20 RH thread, providing adjustment as-is and extra thread, allowing you to cut them shorter as deemed necessary by your application.
The Sealed Rod Ends in this kit are a RockJock exclusive and feature a weatherproof boot for a long life span in all climates.
Link sets are compatible with our Antirock Sway Bar Kits, but are able to be used universally in many applications to replace non-adjustable sway bar links.
Additionally, if you have changed the lift amount on your vehicle you may need a different length of sway bar links to accommodate your new lift. You can simply buy a complete new link set to accommodate your needs.
Being that this specific end link set is designed for the JL and JT front application, this kit includes 3 sealed rod ends and then one thru-bolt heim joint, high-misalignment spacers and hardware for use on the passenger’s side at the axle housing location.

Kit Fits:

• (Compatible with) JL Wrangler and JT Gladiator RockJock Suspension Kits – All
• (Compatible with) JL Wrangler and JT Gladiator Front Antirock Sway Bar Kits - All
• Universal Use

Kit Includes:

• (2)  8 1/2 in. End Link Rods (gold)
• (2)  1/2 in.-20 LH Sealed Rod Ends
• (1)  1/2 in.-20 RH Sealed Rod End
• (1)  1/2 in.-20 RH Thru-Bolt Heim Joint
• (2)  1/2 in.-20 LH Jam Nuts
• (2)  1/2 in.-20 RH Jam Nuts
• (1)  1/2 in. Bolt, Washers and Nyloc Nut
• (2)  Heim Misalignment Spacers

Gold Rod Specs.:

• 8 1/2 in. Long
• 1/2 in. Diameter
• 1/2 in.-20 LH Threads – 2 5/8 in. Long
• 1/2 in.-20 RH Threads – 2 5/8 in. Long
• Center Smooth Area – 3 1/4 in. Long

Adjustment Range:

• Closed – At maximum trimming of this rod (15/16 in. of thread left on each side and the ends and jam nuts screwed on til they meet the smooth area of the rod), C-C is 8.570 in.
• Extended – Uncut rods with ends installed safely adjust out to 11.945 in. C-C

Notes:

• These are optional, upgraded links that are compatible with our JL and JT Suspension Kits as well as JL and JT front Antirock Sway Bar Kits
• Wrench flats:  gold rods - 11mm wrench,  sealed rod ends – 18mm wrench,  heim joints - 19mm wrench,  jam nuts - 3/4 in. wrench

Parts List:

• 8 1/2 in. Link Rod:  CE-9901RD4
• Sealed Rod End (LH):  RJ-527000-102
• Sealed Rod End (RH):  RJ-527000-101
• Thru-Bolt Heim Joint (RH):  CE-99006B
• Jam Nut (LH):  CE-H0020
• Jam Nut (RH):  CE-95462A525
• 1/2 in.-20 x 3 in. Long Hex Bolt:  CE-91257A751
• 1/2 in. Flat Washer:  CE-H0014
• 1/2 in. ID Heim Misalignment Spacer:  CE-990JLFS
• 1/2 in.-20 Nyloc Nut:  CE-95615A220