Superlift 00-10 Ford Ranger 4WD 4in Lift Kit w/ Superlift Shocks

K358

This is Superlift's complete knuckle style suspension lift kit for the 1998-1999, or 2000-2010 Ford Ranger 4wd; providing 4” of lift height.

Features:

• New nodular iron knuckles, not ball joint spacers
• Load bearing bracketry made of .25" thick plate steel or heavy-wall tubing
• Full-width differential/control arm crossmembers provide lateral rigidity
• Rear lift achieved via blocks
• Front / rear Superide shocks included
• Heavy-duty replacement front driveshaft available

The lift kit retains factory ride quality, steering geometry, and CV axle angles. All load-bearing bracketry is laser-cut from .25" steel plate.

This replacement steering knuckle lift includes lower control arm crossmembers, plus bracketry to lower the torsion bar crossmember.

A 3" block kit provides rear lift. The lift kit includes front and rear Superlift shocks.

NOTE: FX4 models require optional Rear U-bolt Kit part #10914.

• 2000-2010 Ford Ranger 4 in. Suspension Lift Kit 4WD

IMPORTANT DISCLAIMER: The provided tire/wheel fitments are approximate. Actual dimensions of a given tire size can vary considerably from one brand to another. Manufacturers' wheel offset and backspacing measurement points are not always consistent. Backspacing greatly impacts tire-to-fender clearance when turning. Wheel width and backspacing influence whether the tires protrude past the fenders, and to what extent. Considering these important factors, we recommend that you fit-check your tire/wheel selection prior to purchasing.