SPC Adjustable Camber Arm | BMW 1 Series | BMW 3 Series

$134.99 CAD $216.99 CAD

SKU: 67105 SPC

Secure 
Payment Processing

67105

Factory camber adjustment on the rear of the BMW 1 & 3 Series is limited and often not enough. Use SPC's rear camber arm to get an additional ±3° of camber on the E90, E91, E92, & E93 as well as the E82 & E88 models. Simply replace the OE link with SPC's adjustable link and adjust camber to minimize tire wear, optimize handling, or get ready for the track. Once camber is where you want it, set toe with the OE cam and you are good to go. This arm is equipped with SPC's xAxis™ ball joint and a bonded rubber bushing to maintain factory ride quality. The arms are sold per side, get two kits if you need to adjust both sides of the car.

Rear Adjustment range: Camber ±3.00°
Installation time: .6 hr/side
Required: 1 per wheel

 

This Part Fits The Following Vehicles

MAKE MODEL SUBMODEL ENGINE DRIVETRAIN
BMW 1 Series E8X (2008-2013) 135i N54 3.0L
BMW 1 Series E8X (2008-2013) 128i N52 3.0L
BMW 1 Series E8X (2008-2013) 1M N54 3.0L
BMW 1 Series E8X (2008-2013) 135i N55 3.0L
BMW 3 Series E9X (2006-2012) 325i N52 3.0L
BMW 3 Series E9X (2006-2012) 325xi N52 3.0L
BMW 3 Series E9X (2006-2012) 328i N52 3.0L
BMW 3 Series E9X (2006-2012) 328xi N52 3.0L
BMW 3 Series E9X (2006-2012) 330i N52 3.0L
BMW 3 Series E9X (2006-2012) 330xi N52 3.0L
BMW 3 Series E9X (2006-2012) 335d M57 3.0L
BMW 3 Series E9X (2006-2012) 335is N54 3.0L
BMW 3 Series E9X (2006-2012) M3 S65 4.0L
BMW 3 Series E9X (2006-2012) 335i N54 3.0L (2007-2009)
BMW 3 Series E9X (2006-2012) 335xi N54 3.0L (2007-2009)
BMW 3 Series E9X (2006-2012) 335i N55 3.0L (2010-2012)
BMW 3 Series E9X (2006-2012) 335xi N55 3.0L (2010-2012)