SPECIAL FULL TURBINE KIT GT5565_BB R35

11003-AN020

The new generation GT5565_BB
turbo kit, evolved and inherited from
the GT1000+ kit.

■ The compressor
housing, originally
designed specifically
for the R35, has been
redesigned for the
GT5565_BB. A ported
shroud was
successfully
implemented within an
extremely tight space.

■Shares the same
exhaust manifold and
GTII wastegate layout
as the GTII 900, 1000,
and 1000+ kits.
Together with the turbo
housing, the
components are made
of heat-resistant cast
steel to ensure
durability.

■Comprises the turbocharger unit, suction
pipe, chamber pipe, exhaust manifold, front
pipe, GT II wastegate, steel water/oil lines,
replacement engine mounts, and other
miscellaneous small parts.

【Features】
 The GT5565_BB kit inherits the “symmetry layout,” a key feature of the R35 full turbine kit.
This kit allows for a specification of over 1000 PS with minimal modifications.
 At a boost pressure of 200 kPa and 5000 rpm, it produces a maximum torque of 1380 Nm (140 kgf·m), and a maximum output of 827
kW (1215 PS) at 6800 rpm.
 Equipped with an additional ported shroud to prevent surge during spool-up, it improves controllability during circuit driving.
 The exhaust manifold and turbo housing use heat-resistant cast steel, ensuring high durability against heat and vibration.

828kW(1215ps)/6495rpm
MAX TORQUE 1380N・m(140kg・m)/5025rpm

Contributed to setting personal best lap times at the circuit for two monitor users.
Received positive feedback that the mid-range RPM performance has become easier to drive

compared to the previous setup.

For engine oil, we recommend Premium Pro or Racing Pro 10W-50.

●Main Components

Turbine GT5565_BB/ GT5565R_BB
Exhaust Manifold Heat-resistant cast steel exhaust manifold outlet
inner diameter: D47 mm
Wastegate GTII D50mm×2
Front Pipe SUS304 D70mm-75mm
Suction

150mm-80 Power Flow+
Aluminum buffed finish D70mm suction pipe
For suction kit (14021-AN021)
Chamber Pipe Aluminum casting D60mm-70mm
Others Replacement Engine Mount (Right Side)

For the GT1000 and GT1000+, we previously offered a kit to be used with the Racing Suction (70020-AN107), but now we
have included a dedicated turbine suction kit (14021-AN001) designed specifically for the turbine kit.
Note: The full turbine kit (11003-AN019) does not include the D80mm-70mm suction pipe (air flow adapter).

【Precaution】
 Installation requires engine removal and reinstallation.
 The kit does not include the fuel pump, injectors, F-CON, EVC, or engine parts.
 The factory-set boost pressure for the wastegate is approximately 90–100 kPa.
 It is necessary to modify the stock water pipe.
 It is necessary to modify the stock T/C heat insulator.
 This product is intended for competition use only. We do not provide any warranty for engine, transmission, or other
damage caused by installation or use of this product.
 Since this product requires removal of the catalytic converter, it does not comply with vehicle safety regulations and
cannot be used on public roads.
 It is excluded from dealer warranty coverage.
 To achieve the kit’s full performance, please use the included Power Flow filter (gray single-layer).
 The included Power Flow filter is designed for race trial use only. Avoid using it on public roads.
【Related Products】
Parts Product Name Code No. Remarks

Recommended
parts

CAPACITY UPGRADE KIT 4.3L STEP Pro
BCD 21004-AN024

CONROD BEARING ADUSTMENT VR43
STEP Pro 24998-AN004

Connecting rod bearing
clearance adjustment and
chamfering service
Available only when
purchased together with the
4.3L STEP Pro

CRANK DAMPER PULLEY 24998-AN001
CAMSHAFT+VALVE SPRING SET 22002-AN038 Individual IN/EX set
FUEL PUMP UPGRADE 14007-AN003 Set of 2, 195 L/h per unit
HIGH-FLOW SURGE TANK FULL KIT 13008-AN003 Compatible with additional

injectors

INTERCOOLER KIT GT1000SPEC 13001-AN015 Part number 13002-AN004
is required for installation
INTERCOOLER FULL PIPING KIT 13002-AN004 SQVIV Included

Replacement
parts POWER FLOW GRAY SINGLE LAYER G04513-
K00410-00

Please avoid using on
public roads