Synergy 07-18 Jeep Wrangler JK/JKU Weld-On Rear Track Bar Bracket

2254279 Features:
Synergy JK Weld-On Rear Track-Bar Bracket
Weld-On rear track-bar bracket designed to replace the weak factory JK track bar bracket
Replace the thin factory brackets on a stock axle or use for swapping any axle into a JK
Multiple Track-bar holes for suspension adjustments
Designed to fit stock JK axle tubes, 3.150" diameter
Will fit other diameter axle tubes with minor trimming
Track bar relocation bolt holes are 2.900", 3.713", and 4.525" above the stock track bar mounting location.
Note: Requires the use of a minimum 3" bump stop spacer
Note: This bracket requires the use of a minimum 3" rear bump stop spacer for clearance with the exhaust. When using a lower relocation bolt hole or aftermarket exhaust, a shorter bump stop spacer may be used
Installation Instructions
Reference Drawing
More information: www.p65warnings.ca.gov