VOR4FQ218-028LComplete System
2011-2014 - Complete systems are available for manual transmission vehicles only.
605HP Complete Systems, 50-State Smog Legal under CARB E.O. # D-213-33
Complete, fully calibrated supercharger systems are available for the 2011-2014 5.0L Mustang GT, featuring the V-3 Si-Trim centrifugal supercharger with air-to-air charge cooler.
The complete system will boost your stock 2011-2014 GT to 605 HP and 483 lb/ft torque with 7.5 PSI from the V-3 Si-Trim supercharger at the factory redline.
Note: Supercharger System will not clear fog lights on California Special models. Fog lights will need to be removed or custom discharge tubing will need to be obtained.
The 2011-2014 Mustang 5.0L GT system uses Vortech's V-3 Si-Trim supercharger. Continued development in Vortech's Lab resulted in the V-3 Si. The "i" stands for improved and with its new patented oil control system and state of the art centrifugal compressor stage this V-3 Si-Trim literally blows away the competition. Industry leading 78% adiabatic efficiency [SAE J1723 standard] means less heat is being generated, drive power is reduced and more net power is produced. Less heat also means better durability. Also, Vortech's supercharger systems weigh less than half of the low-tech competing brands.
Superior Technology
Centrifugal superchargers easily make more pressure and flow than a roots type blower and are much more efficient. Read our Roots vs Centrifugal comparison to see the numbers.
Vortech supercharger systems are a great value. Dollar for dollar, Vortech systems deliver more horsepower than virtually any other method of upgrade. Also, driven normally, gas mileage often increases rather than decreases.
Available Supercharger System Finishes
For that fully integrated look, 5.0 Mustang systems are available in factory matching Black Finish. Polished and Satin Finish units are also available.
Complete System Included Components and Features
- V-3 Si-Trim compressor with 3.60" drive pulley
- Manifold boost pressure: 7.5-8.5 psig @ redline on stock engine
- Supplied SCT programmer re-flashes the ECM with a safe, custom Vortech calibration for 91-octane fuel.
- Fuel system upgrade includes fuel rail spacers and high flow replacement fuel injectors
Air inlet assembly includes:
- High-flow roto-molded ducting. Mates to OEM airbox and some aftermarket "CAI" MAF/inlet assemblies
- OEM replacement K&N panel filter
- Silicone sleeves and reducers
- Stainless steel clamps
- PCV and breather hose provisions for both automatic and manual transmission applications
- Replacement engine coolant pipe and hose assemblies
- Engine coolant reservoir replacement assembly
- Dual plate supercharger mounting system includes idlers, drive belt and all hardware. Mount features multiple position idler location for a wide range of belt and pulley fits.
Discharge components include:
- High flow air/air charge cooler. 24" x 13" x 3.5" cooler core.
- Mandrel bent 3" aluminum charge tubes for high flow and minimal weight
- Stainless steel clamps
- Silicone sleeves
- 98mm MAF housing configured for "blow-through" use. Integrated air-straightener upstream of the MAF housing.
- Vortech Maxflow Race Bypass Valve with filter
CARB Compliance
Complete systems are 50-State Emissions Legal per California Air Resources Board (CARB). CARB Executive Order # D-213-33
Installation
Installation time is rated at 8-10 hours.
INSTALLATION MANUAL
Optional Parts/AccessoriesCompetition Air Inlet Assembly with Filter
4FQ112-060 - Features large, high-flow duct with oversized K&N filter element and sealed air box. Provides minimum restriction for high-flow competition use. Adds additional 20-40HP.
Carbon Fiber Air Inlet Duct
4FQ012-013 - Stylish upgrade for your Vortech Coyote Supercharging System. Featuring direct replacement, smooth carbon fiber air inlet duct for enhanced underhood appearance.
8-Rib Drive Upgrade
4FQ116-001 - 8-Rib Drive Upgrade, 2011-2012 Ford 5.0L Mustang (4-Bolt Water Pump Pulley)
4FQ116-003 - 8-Rib Drive Upgrade, 2013-2017 Ford 5.0L Mustang (3-Bolt Water Pump Pulley)
- The 8-Rib pulley upgrade is a must for any high-output tuner kit. The extra two ribs allow 33% more drive power to be transmitted to the supercharger and also reduce slip that reduces power and shortens belt life.
Supercharger pulleys
6-Rib pulleys: 2A036-348, 2A036-333, 2A036-312, 2A036-287
8-Rib pulleys: 2A038-348, 2A038-333, 2A038-312, 2A038-295
Fuel Pump Booster
5A102-037 - The Maxflow® Plug-and-Play Voltage Booster Assembly increases voltage to the fuel pump for increased flow to the injectors. Included harness plugs directly into factory connector for simple, "plug-and-play" installation.
Warranty Information:
3-Year Supercharger Limited Warranty - Available with V-3 superchargers (if purchased as part of a complete street-legal system) for an additional $50.00.
Note: Tuner kits are only eligible for a 1-Year Warranty.
This website does not show live stock.
If the product is in stock we ship same/next day.
If a product needs to be ordered in the typical wait time is 1-2 weeks. This means the product is special ordered.
Shipping times vary depending if the part is in stock at our warehouse and which shipping option is chosen at checkout.
Please contact us for an accurate ETA and availability.
